A Gas Safety Certificate by a qualified engineer will visit your home and inspect various gas appliances such as stoves, ovens, boilers, and hot water cylinders.
Statistics show that 34% of his deaths in the UK are due to gas appliance failures. So these checks are important for your family’s safety. A gas safety inspection usually takes 30 minutes, but this depends on the size of the property and whether urgent repairs is recommend.
Tenants are often un-prepare for these annual checks and don’t know what to expect. This article will help you understand what happens during a Landlord Gas Safety Certificate and your responsibilities as a tenant.
What happens at the gas security check?
During a gas safety check, a certified engineer performs the following tasks:
- Visual inspection of all gas appliances, heating systems (radiators, hot water cylinders) and boiler flow systems
- Check and record combustion pressure and gas volume
- Test gas gauge tightness to eliminate leaks
- Check the exhaust gas of the equipment
- Check the condensation trap (clean if necessary).
- Make sure safety devices are working properly
- Check air supply and ventilation
- Check the pressure vessel inside the heater
How much does a gas safety assessment cost?
Gas Safety Certificate costs range from £30 to £150 depending on the certified heating technician. Some companies have a set fee for some electrical appliances, while others charge an additional fee if you want to try gas appliances.
Here are some tips: Book your landlord gas safety certificate in the summer. Heating technicians can be extremely busy in the winter, and without space, the experts may not be available in time. Additionally, heating technicians are often out of work during these months, so companies offer packages and discounts during the summer months.
What is a Gas Safety Certificate?
Once the Gas Safety Certificate is complete, the engineer will provide the landlord with a digital copy of the landlord’s Gas Safety Record (LGSR) (known as CP12 or Gas Safety Certificate). The Gas Safety (Installation and Use) Regulations 1998 require every tenant that he obtains this certificate every 12 months.
This document contains the following information:
- Location and description of all gas appliances
- Device test results
- Details of defects/shortcomings and proposed solutions
- Inspection date
- Property address
- Engineer’s name, signature and registration number
Are tenants required to undergo regular gas safety inspections?
As a tenant, you is not require by law to conduct an annual gas safety inspection or obtain a Gas Safety Certificate. This is the landlord’s responsibility. We encourage you to periodically check with your landlord about these security ratings.
Improper gas appliances can produce the toxic gas carbon monoxide, which can be fatal if inhaled continuously. Hazards associated with gasses – poisoning and explosion – can cause serious damage and permanent destruction. And survivors of these events often have long-term health problems.
Regular gas safety checks therefore ensure that all gas equipment is working properly and that no safety hazards arise. Additionally, these safety checks extend the life of your equipment.
What happens if a tenant fails a gas safety assessment?
If the inspector concludes that the gas appliance is unsafe or defective, record this by checking the “unsafe use” checkbox on the Gas Safety Certificate. Gas safety documentation generally lists her three codes that indicate the appliance is unsafe to use.
- Quick Danger (ID) – For devices that can quickly become dangerous.
- At Risk (AR) – Equipment or facilities that have the potential to pose at least one hazard.
- Not Up to Current Standard (NCS) – For equipment or facilities that do not meet the required standards but are still technically usable.
In her first two categories, the heating engineer asks for permission to disconnect the gas supply from the unit. It then advises any necessary repairs/adjustments to repair the device. Landlords should ensure that these repairs is made as soon as possible to avoid putting their tenants at risk.
What results can tenants expect during a gas safety inspection?
Tenant safety and security are the primary responsibilities of property owners. Therefore, a landlord is legally obligate to schedule a gas safety check and obtain Landlord Gas Safety Certificate to ensure. That all gas appliance is properly install and fit for use.
We hope this article has help you understand the basics of a gas safety inspection and why it should not ignore or delay. Check all gas appliances and ask your landlord to provide a Gas Safety Certificate. Must update annually.
0
0
Average Rating