You must know that most video surveillance system problems are caused by mechanical failure due to factory defaults -. In contrast, on the other hand, the most serious issues are caused by video transmission problems due to cable and connectors misuse, malfunction, and errors during installation.
Commercial security camera installation services should consider the limitations of cameras that can be distributed to a particular application. It is also important to know and manage customer expectations. Using the right, reasonably high-quality products in systems equal to their power is the key to finishing the camera work without too many obstacles. Every commercial security camera installation poses new challenges in a unique way to overcome them.
However, there are a few issues video surveillance providers seem to be experiencing in general. Here are common problems and the way to fix them:
Rolling White Stripes And Colours On The Screen Commercial Security Camera Installation
In-camera video, video cables running near high power sources cause rolling lines or ghosts.
It is recommend to bench the test cameras elsewhere before installing to eliminate hardware damage as a cause of any problems should they occur. The obvious solution is to keep the wires away from sources that provide high-power electrical charges at any running time. Improperly installed power circuits may cause video interference. Good quality cable is also required for any installation.
Infrared Gloss And “White Outlet.”
Light and larger colored areas are common causes of IR blurring. Additionally, objects close to the camera can result in a “white exit” that looks like a white silhouette that does not appear on the screen. Cameras mounted under eaves with IR LEDs that hit parts of the structure can go back to the cameras and blind them.
Avoid these problems by placing cameras in areas where they do not have objects that can create IR light and ensure that the end-user will not hang or place these objects within three feet of the camera view. Check both daylight and low light conditions before calling the job complete. Lastly, using “Smart IRs” with dynamic IR dynamics can help prevent this problem and ensure you have high-quality night-time photography.
Ir Cams Can’t See In The Dark.
Think of infrared cameras as flashlights – they need more space to return to the eyes and help most users to see in the dark. So, when you point to a flashlight in the sky, you see nothing. The same situation applies to security cameras. And placing cameras on the outside of any area where IR lights may leak will make it difficult to see.
There is a need To ensure that the video surveillance cameras can see at night and select cameras with sufficient IR distance capability. When installing, point at angle-facing cameras – floor or wall – and check the cameras under low light conditions before moving on.
Excessive Daytime Gloss:
Institutions such as banks and hotels usually have glass doors and windows that allow natural sunlight; However, sunlight is a common enemy of security cameras.
It is important to select Wide Dynamic Range (WDR) equipment cameras for these applications. These products are design to provide clear images despite the worst light conditions.
Insufficient Power Causes Cameras To Stop:
In some cases, spec sheets show the camera’s magnetic field. Except that IRs work in low-light systems. For example, an 8-channel camera system may work well during the day and suddenly lose connection to a few cameras at night. In this case. The power supply does not have enough voltage to power the same cameras with IRs.
There is a need to avoid this problem. It is recommend that you use a power supply that supports the electrical requirements of all integrated cameras. Distance is also an important factor during installation.
Insufficient Performance
Like any piece of hardware. Security cameras have their capabilities and limitations.
To ensure adequate coverage of areas that need to be monitor, write an installation map with a quick drawing and ensure that the correct camera will be installed on every pull. Cameras with different focal lengths and viewing angles; therefore, you should use longer lenses in areas that require a closer look and shorter lenses to capture a wider angle.
In most cases, it is recommend that commercial security camera installation must be install to capture licence plates installed at a distance of not more than five feet from the vehicle. High-value items such as cash registers. Entry and exit points. And other essentials may require a dedicated camera for self-monitoring.
0
0
Average Rating